PCNC research and development laboratory
Search:
 

News

|« First  1 2   Last »|

17.01.2012 Congratulations to developers collective of Computer Control System Architecture Department on winning awards of VII International Salon of research, innovation and new technologies "MEDINNOVA - 2011"

Congratulations to the Computer Control System Architecture Department development team on winning awards of VII International Salon of research, innovation and new technologies "MEDINNOVA - 2011".

 

In the period from 30th November to 3rd December 2011 in Casablanca the VII international exhibition of scientific research, innovations and new technologies "MEDINNOVA - 2011" took place with the support of the Ministry of Industry, Trade and New Technologies of Morocco.

Grand Medal of  ”MEDINNOVA – 2011” salon (Morocco, Casablanca, 30.11-03.12.2011) was awarded for the development of “Russian CNC system AxiOMA Ctrl for multiaxis precision equipment control”.



PCNC Research and Development Laboratory


11.12.2011 Congratulations to the Computer Control System Architecture Department development team on winning awards of exhibition PTA-2011

Congratulations to the Computer Control System Architecture Department development team on winning awards of exhibition PTA-2011:

The diploma of XI International Specialized exhibition "Progressive Technologies in Automation (PTA) - 2011" (Moscow, Expocentre, Krasnopresnenskaya nab., September 21-23, 2011) for development of "Systems of processing, storage, transfer and data protection for industrial networks". (Nezhmetdinov R. A, Kuliev A.U., Abdullaev R. A, Chervonnova N.J.)

The diploma of XI International Specialized exhibition "Progressive Technologies in Automation (PTA) - 2011" (Moscow, Expocentre, Krasnopresnenskaya nab., September 21-23, 2011) for development of "Laser technological complex multipurpose numerical control system". (Pushkov R.L., Sokolov S.V., Obukhov A.I., Grigorieva V.S.)

The diploma of XI International Specialized exhibition "Progressive Technologies in Automation (PTA) - 2011" (Moscow, Expocentre, Krasnopresnenskaya nab., September 21-23, 2011) for development of "Mechatronic devices distributed control system with Web-terminal". (Martinova L.I., Salamatin E.V., Dubrovin I.A., Savinov K.A.)

The diploma of XI International Specialized exhibition "Progressive Technologies in Automation (PTA) - 2011" (Moscow, Expocentre, Krasnopresnenskaya nab., September 21-23, 2011) for development of "Cross-platform CNC system “AxiOMA Ctrl” for precision machining". (Martinov G. M, Kozak N.V., Ljubimov A.B., Rybnikov S.V., Seroukhov P. J.)

PCNC Research and Development Laboratory


16.11.2011 Congratulations to graduate student of Computer Control System Architecture Department Kuliev A.U.

Congratulations to graduate student of Computer Control System Architecture Department Kuliev A.U.

Congratulations to the winner of the All-Russian Youth Conference "Innovative Technologies in Mechanical Engineering", postgraduate student of Computer Control System Architecture Department Kuliev Abay Uangalievich, who has received the 3rd degree diploma in the "Process equipment of machine-building manufactures" area.

This year for the first time the University spent the All-Russia youth conference "Innovative Technologies in Machine Building" (ITM 2011) within the framework of "Mechanical Engineering - Tradition and Innovation" conference. ITM-2011 is supported by the Ministry of Education and Science of the Russian Federation under the Federal Program "Scientific and scientific-pedagogical personnel of innovative Russia" in 2009-2013.

Totally it was received more than 200 applications from students, engineers, researchers, teachers, candidate of sciences and doctor of sciences from 18 different Russian companies and universities.

PCNC Research and Development Laboratory


16.10.2011 Fourth All-Russia multiconference on management problems (MKPU - 2011), Divnomorsk (3th - 8th, October, 2011)

Fourth All-Russia multiconference on management problems (MKPU - 2011), Divnomorsk (3th - 8th, October, 2011).

The All-Russia multiconference on control theory problems passed in rest house territory « Golubaya Dal’». The complex territory is entered in the «Red book» as a architectural monument  and represents beautiful park with well-groomed flower beds, the big rosary, scenic avenues and decorative pools. It is organically connects to the urban forestwith the pitsunda pines, with  total area over 800 hectares, and the beach length accounts for 200meters.



The aim of fourth All-Russia multiconference on management problems (MKPU - 2011)  was to provide a forum for scientists and engineers to discuss fundamental and applied researches in the field of processes control and its practical application in various spheres of human activity. The Russian Academy of Sciences (IPU the Russian Academy of Sciences, Moscow) academician Vasilev Stanislav Nikolaevich opened the conference.



The scientific program of conference has united a wide range of questions which were discussed within the limits of three local scientifically - technical conferences:
• «Artificial intelligence and control» (IIU - 2011);
• «Mehatronics and ergatic systems» (MES - 2011);
• « Distributed network-centric and multi-agent control systems» (URSiMS - 2011)

Such interdisciplinary approach helped experts of various scientific directions to exchange ideas and achievements in the developing the control theory by difficult objects and systems, and also practical results of creation highly effective information - operating systems.
Statistics for full-time (arrivals) applications:



From (FSBEO) (HPE) MSTU "Stankin" at the conference have been presented  following reports:

1. Nezhmetdinov R. A, Kuliev A.U., Chervonnova N.J. Building of the distributed control systems based on autonomous PLC  for controling the  waterjet cutting machines electrics (section - URSiMS).



2. Kovalev I.A., Kozak N.V., Abdullaev R. A., Sokolov S.V.  Domestic based on an industrial protocol CANBUS mechatronic systems control specificity (Local Scientific and Technical Conference - MEA).



3. Martinov G.M., Obukhov, A.I., Bondarenko A.I. SERCOS - drives and laser beam deflection systems control organization within the NC (section - MES).



4. Martinova L.I., Pushkov R.L., Sorokoumov A.E. Mechatronic modules -machines control specifity on the protocol PROFIBUS (section - MES).


PCNC Research and Development Laboratory


01.07.2010 AxiOMA Ctrl has been bed-tested on the milling manufacturing centre MC-400

The NC system of "AxiOMA Ctrl" has been bed-tested on the milling manufacturing centre " MC-400 PTOO AutoVAZ ". The MC-400 is suited for implementing highly productive operations of milling, chiseling out, drilling, countersinking and thread cutting in the holes of details of various materials. The manufacturing centre is equipped with a variable-speed drive of main movement, a system of direct measurement of board movement and a multiway tool magazine.

    

 


21.04.2009 One-computer numerical control system ArtNC at an exhibition Photonics. World of Lasers and Optics'2009

At 4th international specialized exhibition «Photonics. World of Lasers and Optics'2009» institute «Computer control systems» of Stankin University represents one-computer system numerical control ArtNC for engraving machine tools and special technologies of work in transparent materials.



The first deputy of the chairman of Parliament committee on a science and high technologies the academician of Russian Academy of Sciences A. Kokoshin took interest in STANKIN's scientific developments. 


Photonics. World of Lasers and Optics'2009


13.03.2009 WinPCNC Academic Edition control system on SMART Board interactive whiteboards

12.03.2009 in the hotel Radisson SAS Slavyanskaya was held the conference “Partnership of business, education and science in area of Information Communication Technologies – instrument of increasing of competitiveness of Russian education”. There was presented our common project with POLYMEDIA Company - WinPCNC Academic Edition control system on SMART Board interactive whiteboards.

PCNC research and development laboratory


05.02.2009 Lecture for postgraduates Ada-technology terra incognita for industry and education

04.02.2009 specialist of Computing Center of the Moscow State University Sergey Rybin gave a lecture “Ada-technology – terra incognita for industry and education” for postgraduates. You can see the slide-show here »

PCNC research and development laboratory


30.01.2009 STANKIN's students catch a chance to study modern HEIDENHAIN CNC systems

According to partner’s program Heidenhain Company equipped teaching center in CNC laboratory. STANKIN's teachers study the new systems at Heidenhain Company now. Students will study new technique this semester.  

PCNC research and development laboratory


26.12.2008 Educational stand with WinPCNC control system and complete set of methodical maintenance

Educational stand is completed by broad assignment WinPCNC system, built on base of industry-oriented personal computer, possessed open architecture, Servotechnica's drivers, module hardware and module methodical support.
It assigned for higher school specialists education on modern systems of computer numerical control, including operators and work planners of CNC machine. Stand mobility is defined by capability of its carry by power of two peoples. »

PCNC research and development laboratory


17.11.2008 Direct report from exhibition INDUSTRY OF EDUCATION-2008

1st day


20.08.2008 International salon of aerospace technologies and services AeroSpace 2008

In Moscow on the 20-24th August 2008 there passes the international conference «PROSPECTS OF APPLICATION OF NEW TECHNOLOGIES AND TECHNOLOGICAL SOLUTIONS IN ROCKET-SPACE AND AVIATION INDUSTRIES» as a part of International salon of aerospace technologies and services «AEROSPACE-2008» and the International salon of arms and a military technology «MVSV-2008».

Moscow State Technological University “Stankin” according to the collaboration with Institute of Control Sciences Russian Academy of Science conducts section «New technologies and intellectual systems in the aerospace technics».

At the conference Moscow State Technological University “Stankin” was represented by report «Modern technologies of processing free form surfaces on CNC machine tools» - authors Dr. Sc. (Eng.) G.M.Martinov, A.I.Obuchov, K.D.Voskresensky.


28.05.2008 Direct report from exhibition METALLOOBRABOTKA'2008

3rd day


 


27.05.2008 Direct report from exhibition METALLOOBRABOTKA'2008

2nd day

 

 

 

 

 


26.05.2008 Direct report from exhibition METALLOOBRABOTKA'2008


 
 
 
 
 
 

PCNC research and development laboratory


|« First  1 2   Last »|